Bantam Vanguard™ PP18004A Power Conditioner, 120 Volt, 15 Amp (1800 VA)

The Bantam Vanguard PP18004A packs a full 1800 VA of clean, protected power into a compact four-outlet enclosure. Its patented series-mode design absorbs surges, filters EMI and RFI noise, suppresses power-line emissions, and holds a rock-solid ground reference, with no sacrificial parts to wear out or shut off. From a full home theater to a heavy gaming rig to a MIG welder, it delivers the professional-grade power conditioning and surge suppression your most important electronics demand. Backed by a lifetime, unconditional replacement warranty.

SKU: N/A Categories: , ,

The Bantam Vanguard PP18004A delivers a full 1800 VA (volt-amps) of power protection in the same compact, rugged four-outlet enclosure as the rest of the Vanguard lineup. With the PP18004A you can protect anything from a full home theater audio system, to your largest gaming setup, to a MIG welder, with zero compromise on the patented, one-of-a-kind surge suppression and power conditioning with ground filtration you expect from Bantam Clean Power.

Our professional-grade power conditioning with superior surge protection is built for business and home-office professionals whose livelihood and reputation depend on high-quality, high-performance systems that demand safe, clean power. This is not a consumer-grade surge protector meant to "sort-of" protect inexpensive electronics.

 

Why Choose the Vanguard™ PP18004A?

  • Vanguard is a complete power conditioner.
  • Absorbs energy spikes, flickers, jolts, and surges traveling down business or home power wiring before they damage your investment.
  • Does not dump harmful energy to ground the way consumer surge protectors do; Vanguard maintains a stable ground reference that digital equipment depends on.
  • Filters EMI and RFI interference such as noise, flicker, hum, crackle, and harmful frequencies traveling along business and home power wiring.
  • Provides bi-directional harmonic attenuation, dampening harmful harmonic power waves that typical electronic equipment generates and shares through power wiring.
  • Improves power factor in digital equipment, increasing efficiency and reducing energy consumption and expense.
  • Series-mode surge suppression that does not wear out, switch off, or stop protecting your investment.
  • Backed by a lifetime, unconditional replacement warranty.
  • A single-phase power conditioner and Surge Protective Device (SPD).
  • Features harmonics filtration and power factor correction.
  • Prevents "surge coupling" across all wires with its patented circuit.
  • Intended for installation closest to the point of use.

Bantam Vanguard is professional grade for your important electronics; everything else is just consumer grade.

Electrical Features

  • Input connection: 6 ft (1.8 m) SJTOW 105°C 14 AWG cord set, molded NEMA 5-15P plug.
  • Output connection: four (4) filtered NEMA 5-15R black outlets.
  • All outlets capable of up to at least 60 dB filtration and maximum surge suppression.
  • Circuit overload protection provided by a 15 amp thermal breaker, push-to-reset.

Electrical Ratings

  • Input voltage range: 110-120 VAC single phase.
  • Output voltage and current: 110-120 VAC single phase, 15 amp.
  • VA rating: 1800.
  • Nominal frequency: 50 to 60 Hz.
  • Power factor: 0.99.
  • Max continuous operating voltage: 150 VAC.
  • Safety: MET Labs Listed to UL 1449.

Performance Metrics

  • Voltage Protection Rating: 330 volts Line-Neutral, Line-Ground, Neutral-Ground.
  • Electrical Mode Protection: patented in-series Normal (L-N) and Common Mode (L-G, N-G, L,N,G).
  • Harmonic Attenuation: 40% typical reduction of odd-numbered current harmonics.
  • Power Factor Correction: up to 30% average improvement.
  • EMI/RFI Filtration: each path (Line, Neutral, Ground) bi-directionally filtered (patented).
  • Noise Attenuation: up to 100 dB reduction on Line and Neutral, up to 60 dB on Ground; range of 100 Hz to less than 1 GHz.
  • Electromagnetic Pulse Reduction: blocks unwanted pulse current from entering Line, Neutral, and Ground.
  • Surge Energy Suppression: series-mode protection provides unlimited joule suppression.
  • Duty Cycle: independently tested to retain performance after 24 hours of constant surges with no degradation to the unit or load.
  • Actual Clamping Voltage: Line-Neutral 120V RMS +/-10V surge (typical); under load, Neutral-Ground 0V RMS +/-10V surge, line current less than 0.0001 amps over RMS.
  • Surge Withstand Rating: Severe Performance Test, Cat. A C62.41-1991 ring-wave surge injected at the 90-degree point of the input sine wave (positive charge, L1, L2/PE) with powered loads in place, with no degradation of device or attached load.

Physical / Environmental

  • Enclosure: ABS/PVC 94V0 with wall-mounting feature.
  • Storage temperature (ambient): -40° to 104° Fahrenheit, -40° to 40° Celsius.
  • Operating temperature (ambient): -40° to 104° Fahrenheit, -40° to 40° Celsius.
  • Moisture: 0 to 90% non-condensing.
  • Product weight: 2.4 lbs.
  • Dimensions: Height 3.25 in (8.25 cm), Width 6.75 in (17.15 cm), Depth 3.5 in (8.89 cm).
  • Duty Cycle: independently tested to retain full performance after a continuous 24-hour surge test, with no degradation to the unit or attached load.
  • Surge Withstand Rating: withstood a 6000V / 3000A combination wave (1.2/50 µs voltage, 8/20 µs current) applied approximately every 45 seconds, matching the surge generator's recovery and recharge interval, across a continuous 24-hour period, with no degradation to the device or connected load.

Intellectual Property

  • U.S. Patents: 8,223,468; 11,775,645; 12,019,751; 12,271,477.

Additional information

Weight 3 lbs
Dimensions 10 × 7 × 5 in
Number of outlets

4

UPC

856804008168

Bantam Clean Power